Pultrusion and Lubrication  0086-25-52453063       haoy@njhaoli.com

Product category

Get In Touch

Nanjing Haoli Hydraulic Equipment Co., Ltd.
Phone:
0086-25-52453063
Cell-Phone:
+86-13814034409
Add:
No. 212 Lantian Road, Jiangning District, Nanjing City, Jiangsu Province, China,211113
Email:
haoy@njhaoli.com
 
Share to:

BL Series Grease Adjustable Injectors

Quantity:
  • BL
  • HAOLI

BL Series Grease Adjustable Injectors

Single and manifold injectors are adjustable up to 0.003 cubic inches discharge per cycle.Each manifold includes two mounting clips and screws (1/4“–20 thread x 1/2” long hex head).

Adjustment

Injector output is controlled by the position of the indicator cap. The location of the cap determines the travel of the discharge piston. When the indicator is fully tightened onto the measuring chamber,lubricant output is decreased to a minimum. Retracting the indicator cap two full turns permits a maximum of .003 cu. in. to be discharged. Turning the indicator cap beyond two full turns will not increase lubricant output. When the individual injector has been adjusted to the desired output,tighten locknut against face of the indicator cap.

Check discharge output from injector if cap is adjusted to less than 1/2 turn from minimum.


Use a clean oil type and viscosity as recommended by machine manufacturer. Check compatibility with synthetic lubricants.

Series Grease Adjustable Injectors


Technical Data

P.N.

Model

Number of outlets

Work Pressure

Viscosity

Discharge

A

L

N

MPa

mm2/s

ml/cyc

mm

mm

33071

BL

1

8.3~24.1

000#~2# 

0.016

~0.131

32

44

33072

2

51

63

33073

3

70

82

33074

4

89

101


Related Products

Related Articles

content is empty!

Home

 Copyright 2019 HAOLI Pultrusion machinery and lubrication system

All rights reserved. Sitemap | Technology by leadong.com
苏ICP备19066680号-1

Get A Free Quote

Please contact us with any questions you may have by filling out and sending the form below.

Haoli Factory